Shop
Showing all 11 results
- Critical Care
Belmont 3-Spike Disposable Set
? Consists of 3-bag spikes, 120 ml reservoir chamber with coarse filter, pump tubing, heat exchanger, pressure chamber with air debubbler, 54 inch patient line, interface to temperature and pressure sensors. ? The set is ready to use to warm and rapidly infuse blood or replacement fluids into patients. ? It also consists of swivel luer connectors allowing for rapid replacement of the fluid reservoir with the optional 3.0 Liter Reservoir. ? It is to be used with the Belmont? Rapid Infuser, FMS2000 and RI-2 only.
SKU: MK1015534 - Critical Care
Belmont 3.0 Liter Reservoir
The Belmont? 3.0 Liter Reservoir is designed to facilitate cases requiring large volumes of fluid. It can accommodate up to 5 infusion bags at one time. Fluid enters the reservoir along the interior wall of the filter, fills the fluid space, and flows through the filter screen, from in to out. The filtered fluid exits the reservoir through the outside bottom port which is connected to the 3-Spike Disposable Set roller tube. During PRIME or Recirculation Mode, fluid is recirculated back to the unfiltered side of the reservoir, from the bottom.
SKU: MK1015575 - Critical Care
Belmont Bifurcated Set 90200038
The straight Inflow/Bifurcated Outflow Patient Line Kit is packaged and sterilized separately from the Heat Exchanger and the Reservoir. Connections between the Patient Line Kit, Heat Exchanger, and the Reservoir shall be made by the end-user.
SKU: MK1018194 - Critical Care
Belmont Hyperthermia Straight Set
The straight Inflow/Outflow Patient Line Kit is packaged and sterilized separately from the Heat Exchanger and the Reservoir. Connections between the Straight Inflow/Outflow Patient Line Kit, Heat Exchanger, and the Reservoir shall be made by the end-user.
SKU: MK1018195 - Critical Care
Belmont Rapid Infuser
Provides instant heat
No water baths or hot plates
Automatic air removal
Touch screen with stepbystep on screen instructions
Simple set up
Automatic priming in seconds
Precise control of infusion
with settings from 2.5 ml/min to 1000 ml/min
Operator controlled bolus infusion
Automatic alarms
when the line becomes obstructed, fluids deplete or when other conditions requiring attention arise
Recirculation mode
Optional large reservoir
Automatic line pressure monitoring
Small and lightweight
15 ft. power cord with lock (USA only)
RoHs compliant
Aluminumfree disposables
Medical grade stainless steel heat exchangerSKU: n/a - Others
Belmont buddy lite™ Fluid Warmer
• The Belmont® buddy lite™ is a battery-powered blood and fluid warmer approved for flight and used globally in war zones, hospitals, ambulances, flightline helicopters, ski patrols, or anywhere warm blood or fluid is needed to save a life. • The device and disposables are compact. • The disposable is self-priming and removes air automatically. • Weight : Heater Unit, Battery, Battery Housing: 1.6 lbs (0.73 kg) • Dimensions : Battery Housing: 3.29 x 7.53 x 1.21” (8.4 x 19.1 x 3.1 cm) Heater Unit: 1.5 x 5.2 x 0.87“ (3.8 x 13.2 x 2.2 cm) Power : Battery Nominal Voltage: 14.4 VDC Battery Recharge: ≈ 2.5 hours • Operating Parameters : Flow Rate: Input Temperature 20ºC – Max 80 ml/min Input Temperature 10ºC – Max 50 ml/min Output Temperature: 38ºC +/- 2ºC Prime Volume: 7.5 ml with valves and tubing at input and output • Disposable : Sterile, non-pyrogenic fluid path, single-patient use only, DEHP free, not made with natural rubber latex.
SKU: MK-2427 - Others
Belmont Hyperthermia Pump
The Belmont® Hyperthermia Pump automatically and continuously monitors both the infusion process and the device operation. If an unsafe condition occurs, alarms identify the problem and the touch screen shows how to solve it. At each alarm condition, the pump stops, the heater turns off, and the diversion valve closes. Instantly fluid to the patient is rerouted back to the reservoir. Features / Benefits : • Heats fluids instantly— achieves specified temperature in a single pass • Automatic temperature regulation— assures optimal therapeutic temperature • Touch screens— direct user through set-up and use • Diversion valve controls recirculation— automatically purges air • Optional 2 reservoir (total 6 liters) configuration— accommodates various procedures • Line pressure monitor— alerts user and stops pump, preventing leaks
SKU: MK-2431