AccuDx CQ T3

Principle:
The test uses anti-human T3 monoclonal antibody conjugated with fluorescence latex coated on the junction of nitrocellulose
membrane and sample sad, and T3 antigen coated on the test line. After the sample has been applied to the test strip, the fluorescence latex-labelled anti-human T3 monoclonal antibody binds with the T3 in sample and forms marked antigen-antibody
complex. The complex moves to the detection zone by capillary action and then it is captured on the test line by T3 antigen. The fluorescence intensity of the test line increases in proportion to the amount of T3 in sample. Then Insert test card into AccuDx CQ Immunofluorescence Quantitative Analyzer the concentrations of T3 in sample will be measured and displayed on the screen. The value will be stored in AccuDxCQ and available for downloading. The result can be easily transmitted to the laboratory or hospital
information system.

Sample diluent composition:
Phosphate buffered saline, proteins, detergent, preservative, stabilizer.
3. A test card consists of: A plastic shell and a reagent strip which is composed of a sample pad, nitrocellulose membrane (the function of membrane and sample pad is coated with fluorescence.
4. Enter testing interface of AccuDx CQ.
5. Remove the test card from the sealed pouch immediatelybefore use. Label the test card with patient or control identification.
6. Put the test card on a clean table, horizontally placed.
7. Using sample transfer pipette, deliver 40 u/ of sample into one tube of sample diluent, mix gently and thoroughly for
1-5 mins. Then drop 100 u/ of the sample mixture into the sample port on the test card.
8. Reaction time: 15 minutes. Insert the test card into AccuDx CQ and start test after reaction time is elapsed. The result will be shown on the screen and printed automatically.

Contents:
1. A kit for AccuDx CQ contains: Package specifications: 25 tests/box, 10 tests/box
1) AccuDx CQ T4 test card in a sealed pouch with desiccant
2) Disposable pipet
3) Sample diluent
4) User manual: 1 piece/box
5) SD card/RFID card: 1 piece/box
2. Sample diluent composition: Phosphate buffered saline, proteins, detergent, preservative, stabilizer.
3. A test card consists of A plastic shell and a reagent strip which is composed of a sample pad, nitrocellulose membrane (the junction of membrane and sample pad is coated with fluorescence latex-labelled anti-human T4 monoclonal antibody, the test lines is coated with T4 antigen, and the control line C is coated with rabbit anti-mouse IgG antibody), absorbent paper and liner.
Note: Do not mix or interchange different batches of kits.