Renal Function 25 strips

Reagents & Performance characteristics:
Based on the dry weight at the time of impregnation, the concentrations given may vary within manufacturing tolerances.
The performance charncteristies of these optical strips have been determined in both laboratory and clinical tests. This test has been developed to be specific for the parameters to be measured with the exception of the interferences listed. Refer to the limitations section for detailed information.

Precautions:
For in vitro diagnostic use only.
The test strips should remain in the original package until use.
Do not use after the expiration date.
Do not touch the reagent area of the test strips,
Discard any discolored or damaged test strips,
All specimens should be considered potentially hazardous and handled in the same manner as an infectious agent.
The used test strips should be discarded according to local regulations after testing.
Check the code chip before performing a test. Make sure to use the code chip that is included with the package of test strip. Insert the code chip into the code chip slot. The code chip slot is located on the left side of the meter.
Check that the specimen type is same as the specimen type tested.
Decisions of medical relevance are not to be taken without consultation of a doctor. Changes to treatment should only he made after proper training.

Storage & Stability:
Store as packaged in the sealed pouch or canister at room temperature or refrigerated (2-30 C),
Keep out of direet sunlight. Test strips are stable through the expiration date printed on the test
staps canister or foil pouch.
Remove only enough test strips for immediate use. Replace the cap on the strips ennister
immediately and tightly.
DO NOT FREFZE.
Do not use beyond the expiration date

Specimen Collection & Preparation:
For professional use: Fresh capillary blood, heparmized or EDTA venous whole blood; serum and heparinized plasma specimen.
Heparinize or EDTA venous whole blocki, serm and heparinizod plasma must be kept in a closed container and must be used with & hours of collection, Mix stored specimen adequately before testing.
Use fresh capillary blood immediately after collection Capillary Transfer Tube or pipette must he used to collect capillary specimen for accurate results